Expertise by Application
In-depth engineering solutions for vertical markets
01-04
———— Challenge 01
ATV & UTV
Off-Road Racing Solutions
Frequent bottoming out causes structural damage; Continuous jolting induces oil vaporisation, leading to damping failure.
KINGHAM Countermeasures
Equipped with multi-stage adjustable nitrogen cylinders, it achieves excellent heat dissipation and pressure compensation through a large-capacity auxiliary tank, effectively preventing damping decay.
———— Challenge 02
Golf/Utility Vehicles High-Frequency Operation Solutions
Prolonged operation at full load has led to spring fatigue failure; the operator is pursuing an extremely low total cost of ownership (TCO).
KINGHAM Countermeasures
Featuring bespoke progressive coil springs for enhanced comfort under light loads and superior stability during heavy-duty operation. Seal longevity increased by 200%, substantially reducing after-sales servicing costs.
———— Challenge 03
RV & Heavy Goods Vehicles Anti-Roll Stability Solutions
A high centre of gravity induces severe body roll, readily inducing driver fatigue; Interior fittings sustain damage due to persistent high-frequency vibrations.
KINGHAM Countermeasures
The large-bore hydraulic cylinder, paired with our proprietary low-friction piston, significantly reduces body sway. The fully synthetic damping fluid adapts to temperature fluctuations across diverse geographical regions.
Dominating the Off-Road Frontier: High-Performance Suspension for ATVs/UTVs
From rugged trails to high-speed desert runs, our ATV/UTV suspensions are built to dominate off-road challenges.
Navigate by ATV/UTVSegment
- ATV(All-Terrain Vehicle)
Designed for single-person or two-person use, featuring upright seating and handlebars, similar to a motorcycle, with a focus on agility and maneuverability for trails and solo adventures.
- UTV(Utility-Terrain Vehicle)
- Featured Products for the Global ATV/UTV Market
Engineered with remote reservoir, adjustable damping, and nitrogen-charged technology, the shock absorber deliver unmatched heat resistance and fade-free performance—whether you’re racing, hauling, or exploring.
H172
Remote Reservior
Length: 440-520mm (custom by project)
Compressional Adjustable
Rebound Adjustable
Spring Preload Adjustable
Redefining Off-Road Leisure：Adjustable Suspension for Golf Carts
H145
Piggyback Reservoir
Length: 380-450mm (custom by project)
Compressional Adjustable
Rebound Adjustable
Spring Preload Adjustable
- Featured Products for the Global Golf Cart MarketDesigned for EZ-GO, Club Car, Yamaha models and other models, these shocks feature heavy-duty springs and precision-valved hydraulics to eliminate bumps on the course or neighborhood streets. Each shock absorber is designed specifically for the corresponding golf carts’ loading and fits.
Meeting Long-Haul Comfort: Adaptive Air Suspension for Recreation Vehicles
- Featured Products for the Global RV MarketAdaptive air spring design reduces driver fatigue and extends suspension life—even on rough highways
Air Shock Absorber
Length: H192-495mm, H192B-520mm (custom by project)
Engineering Resilience for Unstructured Environments: Calibrated Suspension for Robots
Robot Shock Absorber
Customized by project
- Featured Products for the Global RV MarketSpecial angles, low-friction movements, and special protective coatings. Our shock absorbers are resistant to certain degrees of salt spray, chemicals, and dust.
Featured Products for the Global Vehicles Market
Tailored solutions designed to meet the specific demands of every scooter segment.
Comprehensive Vehicles Fitment Guide
Your essential B2B procurement tool. Use the search and filter functions to find the exact parts for your target models.
| Model | Kingham Model # | Length | Adjustment Features |
|---|---|---|---|
| ATV/UTV | H172 | 440-520MM | Spring Preload & Rebound & Compression Adjustable |
| ATV/UTV | H012 | 280-520MM | Spring Preload & Rebound & Compression Adjustable |
| ATV/UTV | H003 | 280-520MM | Spring Preload & Rebound Adjustable |
| ATV/UTV | H010 | 250MM | Spring Preload & Rebound Adjustable |
| Golf Cart | H145 | 380-450MM | Spring Preload & Rebound & Compression Adjustable |
| Recreation Vehicles | H192 | 495/520MM | Air Shock Absorber |
| Sweeping Robot | H211 | 150MM |
Your Expert Partner in Vehicles Suspension
We solve. We build. We lead. Discover the core strengths that make Kingham Technology a trusted partner in performance suspension.
Design & R&D
Our experienced R&D team, with over 15 years of industry expertise, develops more than 20 new products annually for our clients. Leveraging over 78 technical patents, we collaborate with customers to ensure their brands maintain sustained competitiveness in the market.
Advanced Manufacturing
Our modern manufacturing facility spans over 16,000 square meters, equipped with more than 100 CNC precision machines and a dedicated anodizing workshop. We utilize automated assembly and testing equipment while implementing comprehensive quality inspections to ensure every product meets the highest standards.
Global Partnership
With over 8 years of ODM/OEM service experience, we have successfully served aftermarket clients across Europe, the United States, and Southeast Asia. We provide comprehensive customization services, committed to becoming your most trusted suspension system solutions provider.
